Processing instructions for blank products
The beautiful and magic range of TheMagicTouch transfer papers currently consists of thirty-one different variants, where you only need a printer with associated software, a blank product, or any hard surfaces and a heat press. Just a small investment to setup and the most versatile, which is what makes this system so successful.
Processing instructions Blank products
Product/Substrate | TheMagicTouch Transferpaper | Time | Celsius/Fahrenheit | Pressure | PrePress | Sealing | Mirror Image | Notes |
---|---|---|---|---|---|---|---|---|
Acryllic, thick (1 cm/0,4″ and more) | TheMagicTouch ORD 8.1 | 60 seconds | 140°C/285°F | Low | N/A | N/A | No | Use TheMagicTouch Application Sponge. Leave backing paper on the product do not peel off. |
Acryllic, thin (0,9 cm/0,39″ and less) | TheMagicTouch ORD 8.1 | 40 seconds | 140°C/285°F | Low | N/A | N/A | No | Use TheMagicTouch Application Sponge. Leave backing paper on the product do not peel off. |
Acryllic, thick (1 cm/0,4″ and more) | TheMagicTouch CPM 6.2 | 120 seconds | 170°C/340°F | Medium | N/A | N/A | Yes | Use TheMagicTouch T.pad. Warm peel. |
Acryllic, thin (0,9 cm/0,39″ and less) | TheMagicTouch CPM 6.2 | 30 seconds | 170°C/340°F | Medium | N/A | N/A | Yes | Use TheMagicTouch T.pad. Warm peel. |
Book covers, coloured | TheMagicTouch CPM 6.2 | 60 seconds | 160°C/320°F | High | N/A | N/A | Yes | Use TheMagicTouch Application Sponge, gingerly moisten with water spray bottle before pressing. White toner required. |
Book covers, white | TheMagicTouch CPM 6.2 | 60 seconds | 160°C/320°F | High | N/A | N/A | Yes | Use TheMagicTouch Application Sponge, gingerly moisten with water spray bottle before pressing. |
Canvas | TheMagicTouch TTC 3.1+ | 10 seconds | 180°C/360°F | High | 5 seconds | 5 seconds with TheMagicTouch Release Paper | Yes | Warm peel, press again with plain paper for 1 till 3 seconds to remove some extra coating. |
Cardboard coasters | TheMagicTouch CPM 6.2 | 2 seconds | 130°C/265°F | Medium | 2 seconds | N/A | Yes | Hot Peel. |
Composite Board | TheMagicTouch RST 9.1 | 120 seconds | 160°C/320°F | High | N/A | N/A | Yes | Use TheMagicTouch Application Sponge. Mirror Image, Backing paper comes loose after spraying with water. |
Cork, smooth | TheMagicTouch RST 9.1 | 120 seconds | 160°C/320°F | High | N/A | N/A | Yes | Use TheMagicTouch Application Sponge. Mirror Image, Backing paper comes loose after spraying with water. |
Cotton, coloured, Fine & Coarse | TheMagicTouch OBM 5.4 | 15 seconds | 120°C/250°F | High | 5 seconds | N/A | Yes | Cover print with TheMagicTouch T.Seal. |
Cotton, White, Coarse weave | TheMagicTouch TTC 3.1+ | 10 seconds | 180°C/360°F | High | 5 seconds | 5 seconds with TheMagicTouch Release Paper | Yes | Cover print with TheMagicTouch T.Seal. |
Cotton, White, Coarse weave | TheMagicTouch T.ONE | 10 seconds | 140°C/285°F | High | 5 seconds | 30 seconds with TheMagicTouch T.Seal | Yes | Warm Peel |
Cotton, White, Fine Weave | TheMagicTouch TTC 3.1 | 10 seconds | 160°C/320°F | High | 5 seconds | 5 seconds with TheMagicTouch Release Paper | Yes | Warm Peel, White toner required. |
Cotton, White, Fine Weave | TheMagicTouch T.One | 5-10 seconds | 140°C/285°F | High | 5 seconds | 20 seconds with TheMagicTouch T.Seal | Yes | Warm Peel. |
Display Cardboard | TheMagicTouch CPM 6.2 | 5 seconds | 140°C/285°F | High | N/A | N/A | Yes | Warm Peel, White toner required. |
FlipFLops | TheMagicTouch TTC 3.1 | 5 seconds | 160°C/320°F | High | N/A | 3 seconds with TheMagicTouch T.Seal | Yes | Warm Peel. |
FlipFLops | TheMagicTouch T.ONE | 5 seconds | 140°C/285°F | High | N/A | 10 seconds with TheMagicTouch T.Seal | No | Warm Peel. |
Glass thick (1 cm/0,4″ and more) | TheMagicTouch ORD 8.1 | 60 seconds | 140°C/285°F | Medium | N/A | N/A | Yes | Hot Peel. |
Glass thick (1 cm/0,4″ and more) | TheMagicTouch ORD 8.1 | 40 seconds | 140°C/285°F | Medium | N/A | N/A | Yes | Use TheMagicTouch Application Sponge. Leave backing paper on the product do not peel off. |
Glass thick (1 cm/0,4″ and more) | TheMagicTouch CPM 6.2 | 180 seconds | 150°C/300°F | Medium | N/A | N/A | Yes | Use TheMagicTouch Application Sponge. Leave backing paper on the product do not peel off. |
Glass thick (1 cm/0,4″ and more) | TheMagicTouch CPM 6.2 | 120 seconds | 150°C/300°F | Medium | N/A | N/A | Yes | Place transfer image up on TheMagicTouch T.pad. Glass on top, cover with release paper. Warm peel. |
Glass thick (1 cm/0,4″ and more) | TheMagicTouch CPM 6.2 | 60 seconds | 160°C/320°F | High | N/A | N/A | Yes | Place transfer image up on TheMagicTouch T.pad. Glass on top, cover with release paper. Warm peel. |
Glass thick (1 cm/0,4″ and more) | TheMagicTouch CPM 6.2 | 60 seconds | 160°C/320°F | High | N/A | N/A | Yes | Place transfer image up on TheMagicTouch T.pad. Glass on top, cover with release paper. Warm peel. |
Leather, coloured | TheMagicTouch CPM 6.2 | 60 seconds | 160°C/320°F | High | N/A | N/A | Yes | Use TheMagicTouch Application Sponge, gingerly moisten with water spray bottle before pressing. |
Magnetic Rubber | TheMagicTouch CPM 6.2 | 90 seconds | 160°C/320°F | High | N/A | N/A | Yes | Use TheMagicTouch T.pad. Warm Peel. |
Metal | TheMagicTouch CPM 6.2 | 90 seconds | 180°C/360°F | High | N/A | N/A | No | Use TheMagicTouch A.pad. Warm Peel. |
Mousepad | TheMagicTouch TTC 3.1 | 10 seconds | 180°C/360°F | High | 5 seconds | 5 seconds with TheMagicTouch Release Paper | Yes | Warm Peel. |
Polyester, coloured | TheMagicTouch OBM 5.4 | 10 seconds | 120°C/250°F | High | 5 seconds | 5 seconds with TheMagicTouch Release Paper | Yes | Cover print with TheMagicTouch T.Seal. |
Polyester, white, coarse weave | TheMagicTouch TTC 3.1+ | 10 seconds | 180°C/360°F | High | 5 seconds | 5 seconds with TheMagicTouch Release Paper | Yes | Warm Peel. |
Polyester, white, fine weave | TheMagicTouch TTC 3.1+ | 10 seconds | 180°C/360°F | High | 5 seconds | 5 seconds with TheMagicTouch Release Paper | Yes | Warm Peel. |
Polyester, white, fine weave | TheMagicTouch T.ONE | 5-10 seconds | 140°C/285°F | High | 5 seconds | 20 seconds with TheMagicTouch T.Seal | Yes | Hot Peel. |
PU Leather, white | TheMagicTouch CPM 6.2 | 60 seconds | 160°C/320°F | High | N/A | N/A | Yes | Use TheMagicTouch Application Sponge, gingerly moisten with water spray bottle before pressing |
T-shirt, white cotton | TheMagicTouch T.ONE | 5-10 seconds | 140°C/285°F | High | 5 seconds | 20 seconds with TheMagicTouch T.Seal | Yes | Hot Peel. |
T-shirt, white cotton | TheMagicTouch TTC 3.1 | 10 seconds | 180°C/360°F | High | 5 seconds | 5 seconds with TheMagicTouch Release paper | Yes | Warm Peel. |
Wooden board 1cm/0,4″ or more thicker | TheMagicTouch RST 9.1 | 120 seconds | 160°C/320°F | High | 5 seconds | N/A | Yes | Use application sponge. Mirror Image, Backing paper comes loose after spraying with water. |
Wooden Board, less than 1cm/0,4″ thicker | TheMagicTouch RST 9.1 | 60 seconds | 150°C/300°F | High | 5 seconds | N/A | Yes | Use application sponge. Mirror Image, Backing paper comes loose after spraying with water. |