Home • Help Center • Printers • TheMagicTouch transfer papers with UniNet iColor 540

TheMagicTouch transfer papers with UniNet iColor 540

Back to printers

A4 white toner printer; the iColor 540 printer comes with his own RIP software, iColor Pro RIP Essentials. The toner and printer work very good in combination with TheMagicTouch transfer media. You will find the correct settings below so you will have the most effect form your iColor printer and TheMagicTouch Tranfer Media.

Navigate to

iColor standard settings


iColor standard settings

Media 1. Print mode: 2. Input Tray 3. Paper Type 4. Toner Config 5. WTC
TheMagicTouch TTC 3.1 Generic 1 step light Bypass Tray Coated Glossy Overprint 220
1 Step Transparency Light CMYK Bypass Tray Coated Glossy Thick CMYK 220
TheMagicTouch TTC 3.1 + Generic 1 step light Bypass Tray Coated Glossy Overprint 220
1 Step Transparency Light CMYK Bypass Tray Coated Glossy Thick CMYK 220
TheMagicTouch WOW 7.8 Hard Surface Underprint Vibrant Bypass Tray Coated Glossy Thick Underprint 220
TheMagicTouch WTT Generic 2 Step Dark Bypass Tray Coated Glossy Thick Overprint 220
TheMagicTouch T.ONE Generic 1 Step Dark Bypass Tray Coated Glossy Thick Overprint 220
TheMagicTouch OBM 5.4 1 Step Light CMYK Bypass Tray Coated Glossy Thick CMYK 220
TheMagicTouch CPM 6.2 Hard Surface Vibrant Bypass Tray Coated Glossy Thick Overprint 220
Hard Surface Premium CMYK Bypass Tray Coated Glossy Thick CMYK 220
TheMagicTouch DCT 4.5 Aqua Clear Bypass Tray Coated Glossy Thick Underprint 220
TheMagicTouch RST 9.1 Hard Surface Vibrant Bypass Tray Coated Glossy Thick Overprint 220
TheMagicTouch TATTOO 2.1 Easy Tattoo Bypass Tray Coated Glossy Thick Overprint 220
TheMagicTouch SPF White Vinyl Label Bypass Tray Coated Glossy Thick Overprint 220



TheMagicTouch Recommendations


TheMagicTouch recommendations

Media 1. Print mode: 2. Input Tray 3. Paper Type 4. Toner Config 5. WTC 6. Mirror
TheMagicTouch TTC 3.1 Generic 1 step light Bypass Tray Coated Glossy Overprint 220 On
TheMagicTouch TTC 3.1+ Generic 1 step light Bypass Tray Coated Glossy Overprint 220 On
TheMagicTouch WOW 7.8 Hard Surface Underprint Vibrant Bypass Tray Coated Glossy Thick Underprint 300 Off
TheMagicTouch WTT Generic 2 Step Dark Bypass Tray Coated Glossy Thick Overprint 220 On
TheMagicTouch T.ONE Generic 1 Step Dark Bypass Tray Coated Glossy Thick Overprint 220 On
TheMagicTouch OBM 5.4 1 Step Light CMYK Bypass Tray Coated Glossy Thick CMYK Off
TheMagicTouch CPM 6.2 Hard Surface Vibrant Bypass Tray Coated Glossy Thick Overprint 400 On
Hard Surface Premium CMYK Bypass Tray Coated Glossy Thick CMYK On
TheMagicTouch DCT 4.5 Aqua Clear Bypass Tray Coated Glossy Thick Underprint 220 Off
TheMagicTouch RST 9.1 Hard Surface Vibrant Bypass Tray Coated Glossy Thick Overprint 220 On
TheMagicTouch TATTOO 2.1 Easy Tattoo Bypass Tray Coated Glossy Thick Overprint 220 On
TheMagicTouch SPF White Vinyl Label Bypass Tray Coated Glossy Thick Overprint Off



  1. Printer Mode: Here you will find the Pre Settings from iColor.
    This setting will set all para meters for the printer
  2. Input Tray: This is the selected tray where you must load your media
  3. Paper Type: Here you set the Fuser settings
  4. Toner Config: Here you set the which toner is in the printer and in which order. This has an effect on the image quality
  5. White Creation: Here you set the amount off white toner this has an effect on the oppacity of your image . You adjust the amount with White Toner Cover (WTC)
  6. Artwork: Here you can set Mirror image on or off if needed