Home » Support » Equipment and tools support » Instructions HTP728 HeatPress

Instructions HTP728 HeatPress

For volume and easy of use

Professional Heat Transfer Press for flat, two dimensional Products with a maximum thickness of 20 mm. Pneumatic operation.

HTP 728 operation manual

Maintenance

Keep the press clean. Cleaning works best with the press powered down, using silicone spay or WD40. Grease the moving parts regularly!

Cleaning the platen

Clean the teflon-coated heat platen periodically with a non-abrasive piece of cloth. Stubborn stains may be cleaned with mineral spirits when the platen is cool.