Home » Support » Equipment and tools support » Instructions HTP234+ HeatPress

Instructions HTP234+ HeatPress

HTP234Plus Exclusively for TheMagicTouch!

Professional Heat Transfer Press for flat, two dimensional Products with a maximum thickness of 65 mm. The HTP234Plus, a heat press with fully digital control of temperature and timing.

HTP234Plus operation manual

Maintenance

Keep the press clean. Cleaning works best with the press powered down, using silicone spray or WD40. Grease the moving parts regularly!

Cleaning the platen

Clean the  teflon-coated heat platen periodically with a non-abrasive piece of cloth.