How to decorate wooden Gift Tags with TheMagicTouch RST 9.1

Here is what you need

• TheMagicTouch RST9.1 transferpaper.
• A CMYK or CYM+white Colour Laser/LED printer.
• A professional heat press.
• An application sponge.
• a Spray bottle.

Most likely Printer setting

The printer settings may vary depending on the printer brand. The following settings serve as a guideline:
• Paper source: MPT/Bypass
• Paper weight: Medium/Heavy.

Your best printer option today

An OKI Color printer and SpaceControl print utility software by TheMagicTouch.
• User friendly intuitive interface
• Pre-sets for all transfer papers
• Free trial version available

Prepare printing

• Load RST9.1 into the selected tray
• Print your artwork
• Note: For white text or image parts on your transfer you would need a CMY-White printer!

Setting up the Heat Press

• Temperature: 150° C / 300° F
• Pressing Time: 60 seconds.
• Pressure: medium/ high.

Preparing the application Process

• Clean the surface of the product.
• Trim the transfer as required.
• Position the product on the lower press platen

Pressing process

• Position the transfer on the product (printed side down)
• Cover the transfer paper with an application sponge.
• Gingerly spray mist of water on top of the application sponge.
• Start pressing

Finally

• Open the heat press.
• Remove the application sponge.
• Spray the RST paper with water and remove the hangers from the press.
• Let the water soak into the paper until it comes loose.
• Remove the RST paper.