In this post we show how to decorate vintage wooden SignBoards with TheMagicTouch CPM 6.2.
Here is what you need
• TheMagicTouch CPM6.2 transfer paper.
• A CMYK or CMY+White Color Laser/LED printer.
• A professional heat press.
• An application sponge.
• a Spray bottle.
Most likely Printer settings
The printer settings may vary depending on the printer brand. The following settings serve as a guideline:
• Paper source: MPT/Bypass
• Paper weight: Medium/Heavy.
Prepare pressing
• Print your artwork
• Trim the transfers as required
Note: The transfer should slightly overlap the print area.
Set up the Heat Press
• Temperature: 155° C / 310° F.
• Pressure: high.
• Pressing Time: 60 to 90 seconds.
Pressing Process
• Place a sheet of plain paper on the lower press platen.
• Position the product on the paper and align the transfer (printed side face down).
• Cover the transfer paper with an application sponge.
• Gingerly spray mist of water on top of the application sponge.
• Start pressing
Finally
• Open the heat press and remove the application sponge.
• Allow to cool down to warm.
• Remove the transfer paper while still warm.