How to decorate garment with TheMagicTouch T.One AutoCut (No Cut) in one single step

Here is what you need

• TheMagicTouch T.One transfer paper.
• A CYM+white Colour Laser/LED printer or under certain conditions a CMYK printer.
• SpaceControl Print Utility (RIP) software by TheMagicTouch.
• A professional heat press.
• A sheet of T.Seal.

Prepare printing

• Launch the SpaceControl print software and select Transferpaper T.One.
• Select the paper size.
• Select the paper tray.
• Open your artwork file.
• Load Transferpaper T.One in the selected tray.
• Click on “ Print”.

Set up the Heat Press

• Temperature: 140° C / 285° F
• Pressing Time: 5-15 seconds.
• Pressure: high.

Preparing the application Process

• Clean the surface of the product.
• Pre-press the garment for 5 -10 seconds.

Pressing process

• Place and align the transfer printed side face down.
• Start pressing.

Finally

• Open the heat press.
• Wait a few seconds or swing shirt to cool down a bit.
• Strip off the backing paper in a slow but steady motion while still hot.

Sealing

Important for washing durability of the garment.

• Cover the image with T.Seal and press again.
• Temperature: 140° C / 285° F
• Pressing Time: 20-30 seconds.
• Pressure: high.

Light Colour garments

T.One enables you to print full colour designs to any white or light colour garments.
First Wash after minimum 48 hours only!