Because this video, how to decorate garment with TheMagicTouch T.One and hot stamp foil, shows you how easy it is to decorate a gorgeous design on to garment without the need for cutting or weeding.
Here is what you need
• TheMagicTouch T.One transfer paper.
• TheMagicTouch T.Foil hot stamp foil.
• A CYM+white or a CMYK Colour Laser/LED printer.
• SpaceControl Print Utility (RIP) software by TheMagicTouch.
• A professional heat press.
• A sheet of T.Seal.
Prepare printing
• Launch the SpaceControl print software and select T.One for T.Foil.
• Select the paper size.
• Select the paper tray.
• Open your artwork file and maximize if required.
• Load Transferpaper T.One in the selected tray.
• Click on “ Print”.
Set up the Heat Press
• Temperature: 140° C / 285° F
• Pressure: high.
Preparing the application Process
• Clean the surface of the product.
• Pre-press the garment for 5 -10 seconds.
• Make sure to let all moisture evaporate.
Pressing process
• Place and align the transfer printed side face down.
• Press for just less than 5 seconds to avoid grey background.
• Open the heat press.
• Strip off the backing paper in a slow but steady motion while still hot.
Applying T.Foil
• Place a piece of T.Foil on the image.
• Cover with release paper and press for 3-5 seconds.
• Open the heat press and remove the release paper.
• Swing shirt to cool down a bit.
• Strip off the foil.
Sealing: Important for washing durability of the garment.
• Cover the image with T.Seal.
• Press again for 3- to 45 seconds.
Finally
• Open the heat press.
• Remove the T.Seal.
First Wash after minimum 48 hours only!
Related Products
Interesting reads
Similar questions
- Can I use any heat press for transfer paper?
- Do you print transfer paper from the manual feed or via the cassette?
- View all questions