How to decorate an Enamel Mug with TheMagicTouch CPM 6.2 and a MugPress

Here is what you need

• TheMagicTouch CPM6.2 transferpaper.
• A CYM+white Colour Laser/LED printer.
• A professional Mug Press.
• A M-pad
• Heat resistant tape.

Most likely Printer settings

The printer settings may vary depending on the printer brand. The following settings serve as a guideline:
• Paper source: MPT/Bypass or Tray/Cassette 1.
• Paper weight: Medium/Heavy.

Your best printer option today

An OKI Colour printer and SpaceControl print utility software by TheMagicTouch.
• User friendly intuitive interface
• Pre-sets for all transfer papers
• Free trial version available

Set up the Mugpress

• Temperature: 150° C / 300° F.
• Pressure: Medium to high.
Note: Please consult your Mugpress manual as values might differ on other devices!

Preparing pressing

• Print your artwork.
• Trim the transfer as required.
• Clean the surface of the product.
• Place the transfer in desired position
• Use heat resistant tape to fix it.

Pressing process

• Wrap the M-pad around the mug.
• Put it in the mugpress.
• Close the press and start pressing.

Finally

• Open the press and take out the mug
• Let cool down completely.
• Remove the transfer paper absolutely cold.