How to decorate a white TShirt with TheMagicTouch T.One and a CMYK Printer

As a rule of thumb every part of the design should have a total toner amount of at least 60%. Solid darker colour text or logos perfectly work with T.One and a standard colour laser/LED printer.

Here is what you need

• TheMagicTouch T.One transfer paper.
• A CMYK colour laser/LED printer.
• SpaceControl Print Utility (RIP) software by TheMagicTouch.
• A professional heat press.
• A sheet of T.Seal.

Prepare printing

• Launch the SpaceControl print software and select Transferpaper T.One.
• Select the paper size.
• Select the paper tray.
• Open your artwork file. The image parts displayed in the preview will print.
• If the result in the preview looks acceptable, Load Transferpaper T.One in the selected tray.
• Click on “ Print”.

Set up the Heat Press

• Temperature: 140° C / 285° F
• Pressure: high.

Preparing the application Process

• Clean the surface of the product.
• Pre-press the garment for 5 -10 seconds.

Pressing process

• Place and align the transfer printed side face down.
• Press for 5-15 seconds.

Finally

• Open the heat press.
• Wait a few seconds or swing shirt to cool down a bit.
• Strip off the backing paper in a slow but steady motion while still hot.

Sealing: Important for washing durability of the garment.

• Cover the image with T.Seal and press again.
• Temperature: 140° C / 285° F
• Pressing Time: 20-30 seconds.
• Pressure: high.

First Wash after minimum 48 hours only!