How to decorate a Plywood Deco with TheMagicTouch RST 9.1 and a CMY+White Printer

Here is what you need

• TheMagicTouch RST9.1 transferpaper.
• A CMYK or CMY+White Colour Laser/LED printer.
• A professional heat press.
• An application sponge.
• a Spray bottle.

Most likely Printer setting

The printer settings may vary depending on the printer brand. The following settings serve as a guideline:

• Paper source: MPT/Bypass
• Paper weight: Medium/Heavy.

Prepare printing

• Load RST9.1 into the selected tray
• Print your artwork
Note: For white text or image parts on your transfer you would need a CMY+White printer

Set up the Heatpress

• Temperature: 150° C / 300° F
• Pressing Time: 60 seconds.
• Pressure: medium/ high.

Preparing the application Process

• Clean the surface of the product
• Trim the transfer as required.
• Place a sheet of plain paper on the lower press platen.

Pressing process

• Position the transfer on the product (printed side down)
• Cover the transfer paper with an application sponge.
• Gingerly spray mist of water on top of the application sponge.
• Start pressing

Finishing

• Open the heat press.
• Take off the product and remove the application sponge
• Spray the RST paper with water until it comes loose from the toner image.

Finally

• Let the water soak into the paper until it comes loose.
• Remove the RST paper.