How to decorate a CoolStuff Phone Case with TheMagicTouch TTC 3.1

Here is what you need

• TheMagicTouch TTC3.1 transferpaper.
• A CMYK or CMY+White printer.
• A professional heat press.
• A sheet of plain paper.
• Release paper.

Most likely Printer settings

The printer settings may vary depending on the printer brand. The following settings serve as a guideline

• Paper source: MPT/Bypass or tray/cassette 1.
• Paper weight: Medium/Heavy.

Prepare printing

• Load transfer paper TTC3.1+ into the selected tray.
• Print your artwork mirrored.

Set up the heat press

• Temperature: 180° C / 360° F.
• Pressure: High.

Pressing process

• Trim your transfer
• Place a sheet of paper on the lower press platen.
• Put the product on the paper sheet.
• Place and align the transfer printed side face down.
• Press for 5 seonds.

Next steps

• Open the heat press.
• Strip off the backing paper while still hot.
• Flip the phone case.
• Place and align the second transfer.
• Press again for 5 seconds.

Finally

• Open the heatpress
• Strip off the backing paper while still hot.

Post-press

• To remove the excess TTC transfer coating post-press with plain paper.
• Pressing time: 2-3 seconds.

We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking Accept you consent to the use of all the cookies. However, you may visit ‘More info’ to provide a controlled consent.