How to decorate a coloured TShirt with TheMagicTouch WoW 7.8 and a CMY+White Printer

Here is what you need

• TheMagicTouch WoW7.8 transferpaper.
• A CMY+White or a CMYK printer (Suited under certain conditions).
• SpaceControl Basic Print Utility (RIP) software by TheMagicTouch.
• A professional heat press.
• A sheet of T.Seal and a T.Pad.
• Release paper.

[Step 1] Preparing the printing process

• Launch SpaceControl and select WoW7.8 MSheet
• Select the paper size.
• Open your artwork file
• Load WoW7.8 MSheet into the multipurpose tray. MSheet = Magenta coloured backprint.
• Click on “Print”.

Set up the Heat Press

• Temperature: 140-145° C / 285-295° F
• Pressing Time A4: 45-60 seconds.
• Pressing time A4XL/A3: 60-75 seconds.
• Pressure: high.

Warming up T.Pad

• Use the T.Pad with the smooth side up.
• If you start from cold, warm up for about 45 seconds.

Preparing the application Process

• Take the printed MSheet.
• Place TSheet face down centered on the MSheet (The yellow bakcprint of the TSheet lies on top)
• Make sure the TSheet edges do not touch the edges of the MSheet.

Pressing process

• Turn upside-down before placing on the T.Pad
• Cover with release paper.
• Start pressing.
The next step is crucial.

Stripping apart the papers

• Open the heat press and strip apart immediately.
• In one steady motion in a very shallow angle.
• Do not remove the release paper before you strip.

[Step 2] Pressing process

• Place and align the transfer printed side face down.
• Press for 5-10 seconds.

Finally

• Open the heatpress and remove the garment.
• Let cool down completely.
• Strip off the TSheet cold.

Sealing

Important for washing durability of the garment.
• Cover the image with T.Seal and press again for 20 seconds.
• First Wash after minimum 48 hours only!