How to decorate a Christmas Party TShirt with TheMagicTouch T.One and Hot Stamp Foil

Here is what you need

• TheMagicTouch T.One transfer paper.
• TheMagicTouch T.Foil hot stamp foil.
• A CYM+white or a CMYK Colour Laser/LED printer.
• SpaceControl Print Utility (RIP) software by TheMagicTouch.
• A professional heat press.
• A sheet of T.Seal.

Prepare printing

• Launch the SpaceControl print software and select T.One for T.Foil.
• Select the paper size.
• Select the paper tray.
• Open your artwork file and maximize if required.
• Load Transferpaper T.One in the selected tray.
• Click on “ Print”.

Set up the Heat Press

• Temperature: 140° C / 285° F
• Pressure: high.

Preparing the application Process

• Clean the surface of the product.
• Pre-press the garment for 5 -10 seconds.

Pressing process

• Place and align the transfer printed side face down.
• Press for 5-15 seconds.

Applying T.Foil

• Open the heat press.
• Strip off the backing paper in a slow but steady motion while still hot.
• Trim a piece of T.Foil and place it on the image.
• Press it for 5-10 seconds.

Finally

• Open the heat press.
• Remove the shirt and let it cool down.
• Cover with release paper and press for 3-5 seconds.
• Strip off the foil.
• Cover with T.Seal and press again for 20-30 seconds.

Take good care for a long life

• First Wash after minimum 48 hours only!
• Delicate wash recommended
• Avoid spinning at high RPM
• Do not bleach
• Do not use fabric softener
• Drip dry recommended