How to decorate a black TShirt with TheMagicTouch WoW 7.8 and a CMY+White Printer

Here is what you need

• TheMagicTouch WoW7.8 transferpaper.
• A CMY+White printer.
• SpaceControl Basic Print Utility (RIP) software by TheMagicTouch.
• A professional heat press.
• Release paper.
• A sheet of T.Seal.

Step 1

Preparing the printing process:
• Launch SpaceControl and select WoW7.8 MSheet
• Select the paper size.
• Open your artwork file
• Load WoW7.8 MSheet into the multipurpose tray. MSheet = Magenta coloured backprint.
• Click on “Print”.

Set up the Heat Press

• Temperature: 140-145° C / 285-295° F
• Pressing Time A4: 45-60 seconds.
• Pressing time A4XL/A3: 60-75 seconds.
• Pressure: high.

Warming up T-Pad

• Use the T-Pad with the smooth side up.
• If you start from cold, warm up for about 45 seconds.

Preparing the application Process

• Take the printed MSheet.
• Place TSheet face down centered on the MSheet (The yellow back print of the TSheet lies on top)
• Make sure the TSheet edges do not touch the edges of the MSheet.

Pressing process

• Turn upside-down before placing on the T.Pad
• Cover with release paper.
• Start pressing.
The next steps are crucial.

Stripping apart the papers

• Open the heat press and strip apart immediately.
• In one steady motion in a very shallow angle.
• Do not remove the release paper before you strip.

Step 2

Pressing process:
• Place and align the transfer printed side face down.
• Press for 5-10 seconds.

Finally

• Open the heatpress and remove the product.
• Strip off the TSheet absolutely cold.

Sealing

Take good care for a long life

• First Wash after minimum 48 hours only!
• Delicate wash recommended.
• Avoid spinning at high RPM.
• Do not bleach.
• Do not use fabric softener.
• Drip dry recommended.

We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking Accept you consent to the use of all the cookies. However, you may visit ‘More info’ to provide a controlled consent.