How to decorate a black T with TheMagicTouch T.One and Hot Stamp Foil and a CMYK Printer

Here is what you need

• TheMagicTouch T.One transfer paper.
• TheMagicTouch T.Foil hot stamp foil.
• A CYM+white or a CMYK Colour Laser/LED printer.
• A professional heat press.
• A sheet of T.Seal.

Printing Process

• Print out your artwork mirrored and in composite black on T.One
• Launch the SpaceControl print software and select T.One for T.Foil.

Set up the Heat Press

• Temperature: 140° C / 285° F
• Pressure: high.
• Pressing time: 5 seconds
Note: On dark/black garment less than 5 seconds to avoid backgrounding!

Preparing the application Process

• Clean the surface of the product.
• Pre-press the garment for 5 -10 seconds.

Pressing process

• Place and align the transfer printed side face down.
• Press for 4 seconds.
• Strip off the backing paper afterwards in a slow but steady motion while still hot.

Applying Hot Stamp Foil

• Trim pieces of T.Foil as required.
• Place them on the images.
• Cover with release paper.
• Press for 3-5 seconds.

Stripping off Hot Stap Foil

• Remove the release paper.
• Swing shirt to cool down a bit.
• Strip off the foil.

Sealing

Important for washing durability of the garment.
• Cover the image with T.Seal.
• Press again for 30 to 45 seconds.

Finally

• Open the heat press.
• Remove the T.Seal.
First Wash after minimum 48 hours only!

We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking Accept you consent to the use of all the cookies. However, you may visit ‘More info’ to provide a controlled consent.