How to decorate a black/coloured T-Shirt with TheMagicTouch WoW 7.8 AutoCut (No Cut) Transfer Paper

Here is what you need

TheMagicTouch WoW7.8 transferpaper.
A CMY+White printer.
SpaceControl Basic Print Utility (RIP) software by TheMagicTouch.
A professional heat press.
Release paper.
A sheet of T.Seal.

Step 1: Preparing the printing process

Launch SpaceControl and select WoW7.8 MSheet
Select the paper size.
Open your artwork file
Load WoW7.8 MSheet into the multipurpose tray. MSheet = Magenta coloured backprint.
Click on “Print”.

Set up the Heat Press

Temperature: 140-145° C / 285-295° F
Pressing Time A4: 45-60 seconds.
Pressing time A4XL/A3: 60-75 seconds.
Pressure: high.

Warming up T-Pad

Use the T-Pad with the smooth side up.
If you start from cold, warm up for about 45 seconds.

Preparing the application Process

Take the printed MSheet.
Place TSheet face down centered on the MSheet (The yellow back print of the TSheet lies on top)
Make sure the TSheet edges do not touch the edges of the MSheet.

Pressing process

Turn upside-down before placing on the T.Pad
Cover with release paper.
Start pressing.

The next steps are crucial!

Stripping apart the papers.
Open the heat press and strip apart immediately.
In one steady motion in a very shallow angle.
Do not remove the release paper before you strip.

Step 2: Pressing process

Place and align the transfer printed side face down.
Press for 5-10 seconds.

Finally

Open the heatpress and remove the product.
Strip off the TSheet absolutely cold.

Sealing

Important for washing durability of the garment.
Cover the image with T.Seal and press again for 20 seconds.

First Wash after minimum 48 hours only!
Delicate wash recommended.
Avoid spinning at high RPM.
Do not bleach.
Do not use fabric softener.
Drip dry recommended.