This video, How to create a personalized Santa Sack with TheMagicTouch TTC3.1 Plus transfer paper, explains how you can make a personalized santa sack in no time at all.
Here is what you need
• TheMagicTouch TTC3.1+ transferpaper.
• A CMYK or CMY+White printer.
• A professional heat press.
• Release paper.
Most likely Printer settings
The printer settings may vary depending on the printer brand. The following settings serve as a guideline:
• Paper source: MPT/Bypass.
• Paper weight: Heavy/UltraHeavy.
Your best option today
An OKI colour Printer and SpaceControl print utility software by TheMagicTouch.
User-friendly intuitive interface.
Pre-sets for all transfer papers.
Free trial version available.
Prepare printing
• Load transferpaper TTC3.1+ into the selected tray.
• Print your artwork mirrored.
Preparing the application process
• Clean the surface of the product.
• Make sure you remove all loose fibers and particles.
• Trim the transfer as required.
Set up the heat press
• Temperature: 180° C / 360° F.
• Pressing time: 10-15 seconds.
• Pressure: High.
Pressing process
• Place and align the transfer printed side face down.
• Start pressing.
Interim step
• Open the heat press.
• Remove the sack from the heat press
• Do not strip off the backing paper.
• Let cool down completely.
Finally
• Press again for 3 seconds.
• Open the heat press.
• Swing the sack to cool down a bit.
• Stretch it sidewards at the bottom to release the corners of the transfer.
• Strip off the backing paper in a slow but steady motion while still hot.
Post-press
• To flatten down fabric nap in light image areas post-press with release paper.
• Pressing time: 1-2 seconds.