MagiCut Soft Metallic Heat-Transfer Film (HTV)

Why you should watch this video

This video, MagiCut Soft Metallic Heat transfer Film (HTV) shows you how simple it is to decorate fabric with beautiful designs with a metallic look and feel.

Here is what you need

• A Cutting plotter
• A heat press
• Release Paper
• MagiCut Soft Metallic Flex
• A weeding tool

Processing Specifications

• Heat Transfer Film: MagiCut Soft Metallic (HTV)
• Temperature: 160° C / 320° F
• Pressure: medium/high
• Pressing Time: 3-5 seconds
• Strip: cold

Preparations

• Load the MagiCut Soft Metallic Flex in your cutting plotter and cut the design.
• Weed the design by removing all unwanted parts of the Flex.

Application Process

• Set the heat press to the required setting: 160°C / 3-5 seconds, medium to high pressure
• Place the garment onto the heat press
• Place the Soft Metallic Flex transfer on the garment, carrier side up
• Press for the set time
• Let the Garment cool down a bit
• Remove the liner

Finally

• If required, you can place a second color of the design, cover with release papier and repeat the step
• After applying all colors, cover with release paper and press again for 3 seconds