In this post we show how to press MagiCut 123Flex Heat Transfer Film (HTV) on a black TShirt.
Here is what you need
A Cutting plotter
A heat press
MagiCut 123Flex Heat Transfer Film (HTV)
A weeding tool
Heat Transfer Film: MagiCut 123Flex Heat Transfer Film (HTV)
Temperature: 160° C / 320° F
Pressing Time: 3-5 seconds
Strip: Warm to cold
Use your cutting plotter to cut the design from the 123Flex Film. After cutting, remove all the unwanted surrounding material of the design from the liner.
Set the heat press to the required setting: 160°C / 320°F and 3-5 seconds, medium pressure.
Place the T-Shirt onto the heat press.
Place the MagiCut 123Flex Heat Transfer Film (HTV) on the product, carrier side up.
Cover with release paper and press for the set time.
Remove the liner.
Although it is not necessary, you can post-press for 3 seconds to get a finish with more of the structure from the garment visible in the flex. Don’t post-press too long for this will make the bonding less optimal.